Part issues
Possible solutions Improper calibration Step 1) start by recalibrating the build plate to the print surface. Loosen both X,Y knob and Z knob on the b...
Fri, 3 Apr, 2020 at 3:43 PM
Possible causes: 1)Incorrect power output settings or exposure time. When printing check that you are using the recommended parameters for the photo r...
Tue, 14 Apr, 2020 at 11:49 AM
The print quality for photocuring resin is affected by the light power and curing exposure time of the projector in your Lumen X. These settings can be a...
Thu, 9 Apr, 2020 at 10:46 AM