Printbed
There is an optional heated printbed that can be installed on the INKREDIBLE+ system. In order to heat the printbed, one of the printheads will not be ...
Tue, 31 Mar, 2020 at 3:15 PM
At this time, there is no cooled option for the printbed of the INKREDIBLE+ system. If your application requires a cooled printbed, please consider our...
Tue, 31 Mar, 2020 at 3:15 PM
The INKREDIBLE+ printbed can fit standard well plates, petri dishes, glass slides, and custom print surfaces.
Thu, 26 Sep, 2019 at 4:55 PM
For printing surfaces smaller than the area of the printbed it is recommended to use the clasps to secure the surface. For unique print surfaces, where the ...
Thu, 26 Sep, 2019 at 4:56 PM
The printbed should reach the set temperature in approximately 10 minutes. It is recommended to allow the printbed to reach the set temperature prior to pla...
Tue, 31 Mar, 2020 at 3:13 PM
Please see the attached document to learn how to calibrate the printbed on your INKREDIBLE+. If you have any questions about these steps contact us at suppo...
Fri, 16 Oct, 2020 at 1:42 PM