Photocuring Toolhead
The crosslinking intensity ranges from 40 mW/cm2 down to 1 mW/cm2 based on the percent intensity and crosslinking height utilized.
Thu, 20 Aug, 2020 at 6:22 PM
The photocuring toolhead is available in 365 nm, 385 nm, 405 nm, and 450 nm wavelengths.
Fri, 27 Sep, 2019 at 5:04 PM
The UV source of the photocuring toolhead is not exchangeable and cannot contain multiple wavelengths due to power restrictions.
Fri, 27 Sep, 2019 at 5:13 PM
Please contact support@cellink.com for specific information about the emission spectra of each photocuring toolhead variation.
Fri, 27 Sep, 2019 at 5:13 PM
Yes, the photocuring toolhead can be utilized to cure individual wells of the well plate. The diameter of the targeting cylinder is meant to fit into a 96 w...
Fri, 27 Sep, 2019 at 5:14 PM
Intensity (mW/cm2), intensity percentage, offset (mm), and height (cm) of 405 nm toolhead. 0 mm offset INTENSITY % 0 cm 1 CM 2 Cm 3 CM 5% ...
Fri, 27 Sep, 2019 at 2:41 PM
For BIO X's Photocuring Toolhead user manual, please feel free to refer to the attached user manual below for your reference. For further assistance an...
Thu, 21 May, 2020 at 2:46 AM