Temperature-controlled printhead
Please feel free to refer to the attached user manual below for your reference.
Fri, 18 Mar, 2022 at 6:43 AM
The TCPH is a printhead for the BIOX system that can both heat and cool the bioink cartridge. This printhead is recommended for use with temperature sensiti...
Fri, 27 Sep, 2019 at 2:53 PM
The printhead contains a thermal block which is heated or cooled via a Peltier element. Heat is dissipated through a foil and fan to cool the TCPH. The prin...
Tue, 17 Sep, 2019 at 5:20 PM
The TCPH is compatible with 3ml cartridges. It is not recommended to use cartridges with smaller volumes than this because of the need for contact between t...
Fri, 27 Sep, 2019 at 2:54 PM
The TCPH cools relative to the chamber temperature of the BIOX system of approximately a decrease of 17 °C. For example, with a chamber temperature of 21 °C...
Fri, 27 Sep, 2019 at 2:54 PM
A nozzle or needle insulator is recommended to more efficiently maintain the temperature of the nozzle or needle. This is necessary because this component o...
Fri, 27 Sep, 2019 at 2:54 PM