Dual Head Bioprinting

Dual head bioprinting: Why is the printer moving but not activating both printheads?
The issue is most likely that the post processor is not adding the proper content to the G-code file.  Open up your G-code file in Notepad or a simila...
Thu, 9 Nov, 2017 at 4:18 PM
How to Calibrate the Printhead Offset
Please follow the provided video to calibrate the printhead offset of your INKREDIBLE+.
Tue, 31 Mar, 2020 at 3:17 PM
How to Print Using Both Extruders at the Same Time
How to allow the user to print using both extruders at the same time on the INK/INK+ Steps First Home the axes of your printer (Prepare Bioprint->Home...
Tue, 31 Mar, 2020 at 3:10 PM
How to level PH1 and PH2; Adjusting the Z height on the INKREDIBLE+
Ideally, you will need a 5mm wrench to adjust the printhead height. A small adjustable wrench could also work. Pliers best avoided, but could also be used w...
Thu, 22 Oct, 2020 at 1:47 PM