How can you do layer by layer bioprinting with different printheads?
Designation of layer by layer printing requires some additional preprocessing of your STL or Gcode file. A guide for slicing a multimaterial print can be fo...
Tue, 31 Mar, 2020 at 2:41 PM
What is the printhead positioning resolution?
The X-Y positioning resolution of the system is 10um.  The Z positioning resolution  of the system is 2.5um. This is the resolution with which the motors ca...
Tue, 31 Mar, 2020 at 2:48 PM
What external pressure source options are there?
Compatible external pressure sources include an air compressor, gas tank (such as nitrogen or air), or building air supply. The INKREDIBLE system can withst...
Thu, 26 Sep, 2019 at 5:10 PM
How often do you need to calibrate?
The INKREDIBLE+ system must be homed each time it is turned on prior to the start of printing. This will position the printhead at the stored ‘zero positio...
Tue, 31 Mar, 2020 at 2:55 PM
Are calibrations stored on the INK+?
The ‘zero position’ is stored within the system. This can be recalibrated under the advanced options in the utilities menu. Furthermore, the Z calibration c...
Thu, 26 Sep, 2019 at 5:12 PM
Can I use my own bioink?
The INKREDIBLE+ system is compatible with custom bioinks so you can use your own blends and compositions. Print parameters such as speed and pressure will n...
Tue, 31 Mar, 2020 at 2:59 PM
Where do I get a new HEPA filter?
You can obtain a new HEPA filter from our webshop or by contacting    
Tue, 31 Mar, 2020 at 2:36 PM
How often should I change the HEPA filter on my INK+?
The HEPA filter should be changed every 6 months under normal usage.    In environments where a lot of particulates are present, the filter will need to b...
Tue, 31 Mar, 2020 at 2:36 PM
What file types are supported by the INK+?
The INKREDIBLE+ are compatible with Gcode files. There are specific commands for the INKREDIBLE/ INKREDIBLE+ systems, please see the Gcode guide for instruc...
Tue, 31 Mar, 2020 at 3:03 PM
How to disable the LED lights on the INK+
Unfortunately, there is no way to diasable the LED lights using the software at this time. CELLINK recommends using black electrical tape to cover the light...
Tue, 1 Oct, 2019 at 12:57 PM