General

Temperature, UV, and solvent stability of consumable plastics
Auto-Clave Safe UV Protected Clear Cartridges  ✔ Amber Cartridges ✔ ✔ Piston-tip cap ✔ Nozzle UV Shield ✔ ✔ Syringes and plungers...
Wed, 18 Sep, 2019 at 5:04 PM
Pause button is not available (appears gray) in HeartWare
If you are printing an object directly from Repetier, and it does not allow you to pause the print (it appears gray), it is probably because of the way the ...
Fri, 28 Sep, 2018 at 12:14 PM
Holes appearing in the object after being sliced? / How to rotate objects in HeartWare
Sometimes this can happen due to the placement of the object, and lack of support structure. Most often this issue can be solved by rotating the placement o...
Tue, 9 Oct, 2018 at 4:21 PM
How to best bioprint cylinders
Depending on how a cylinder-like shape (i.e. blood vessels) was generated it can cause slicing errors (these include modelling/rendering mistakes, shapes lo...
Tue, 9 Oct, 2018 at 1:15 PM
How to add several objects into a same bioprint
You can add several objects into a same bioprint. This is beneficial if you would like to print several objects (for multiple copies of a same file or entir...
Tue, 9 Oct, 2018 at 3:42 PM
How to make a stacked STL
Modifiers can be used directly in Slic3r in order to assign different print infills to a same file. Unfortunately, this feature is not available directly in...
Mon, 10 Dec, 2018 at 4:11 PM
What is Filament Resolution?
The resolution of the resultant filament is dependent on several factors, including applied pressure or extrusion rate, nozzle diameter, printhead movement ...
Tue, 17 Sep, 2019 at 4:21 PM
What is filament resolution?
The resolution of the resultant filament is dependent on several factors that include applied pressure or extrusion rate, nozzle diameter, printhead movemen...
Thu, 26 Sep, 2019 at 5:08 PM
What viscosity range can you print within?
The compatible viscosity range is up to 300,000 cps. Lower viscosity materials will print differently than high viscosity materials. Nozzle and needle param...
Thu, 26 Sep, 2019 at 5:14 PM
Slic3r term glossary
  General Overview:    1: Slic3r’s settings tab: divides the software’s settings into print, filament (used only for temperature), and printe...
Mon, 23 Mar, 2020 at 4:51 PM