Select bioprint to start the printing process.
Select an STL or G-code file from the USB flash drive to print.
Select your print surface.
Select the printhead.
Select the bioink profile.
NOTE: If you are using a custom bioink, you will need to manually set up print parameters in the dropdown menu.
Select the infill pattern, density and layer height for each print.
Select the pressure, temperature and print speed.
Select the print bed temperature, homing sequence direction and more.
Tool settings enable you to inspect the printheads installed, as well as adjust the temperature, pressure and speed.
Modules settings enable you to activate 405-nm and 365-nm UV light.