After preparation step, the “Print” tab is inactive : Support portal

After preparation step, the “Print” tab is inactive Print

Created by: Chris slater

Modified on: Fri, 3 Apr, 2020 at 12:50 PM

If you are unable to activate the print tab once you have completed your preprint set up in prepare follow these steps.

Step1) reslice selected model, adjust resolution and layer thickness if necessary, then restart the print process.

Step 2) completely reload the desired file from the library then restart the print process.

Step 3)Remove selected files from library, upload the desired print file from USB to internal lumenX library, then restart the print process.

Chris is the author of this solution article.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk Support Desk