The print quality for photocuring resin is affected by the light power and curing exposure time of the projector in your Lumen X. These settings can be adjusted in the Print tab of the Lumen X.
Please review the below diagram for the recommended power and exposure times. If you are printing with a resin not provided by CELLINK contact the manufacture for the appropriate print parameters.
| PEGDA | PEGDA200 | PEGDA500 | PEGDA Starter | GelMA |
| 100µm Slice Thickness | ||||
Exposure Time (s) | 18 | 5 | 4 | 2.5 | 8 |
Power (mW/cm^2) | 20 | 20 | 20 | 20 | 20 |
FLTSF/Burn-in | 4x | 4x | 4x | 4x | 3x |
| 50µm Slice Thickness | ||||
Exposure Time (s) | 12 | 3 | 2 | 1.5 | 4.5 |
Power (mW/cm^2) | 20 | 20 | 20 | 20 | 20 |
FLTSF/Burn-in | 4x | 4x | 4x | 4x | 4x |