Installing the driver
Some computers cannot connect to the bioprinters without the required driver. To enable the connection, follow the instructions below to install the driver.
1. Connect the bioprinter to the computer with the USB cable.
2. Turn on the bioprinter.
3. Go to “Devices” in windows “Settings”
4. Select ”Devices and Printers”
5. Double click on “3D Printer powered by RAMBo”
6. On the “Hardware” tab, press “Properties”
7. Press “Change Settings”
8. On the “Driver” tab press “Update driver”
9. Select “Browse my computer for driver software”
10. Download the RAMBo_USBdriver and save it in a know location. Often, this driver is included on the SD card provided to you with your bioprinter. Software->Cellink Host -
11. Browse to where it is saved and select the “RAMBo_USBdriver” folder. Then press “Next”
Once the driver is updated, your computer is ready to control your bioprinter.